3 Account
Contact us
4 Info
Remote control HX-HWP86-RGB-2.4G

Remote control HX-HWP86-RGB-2.4G

20183

LED lighting fixtures, priced directly from the manufacturer.

Call now 060886600 / 078893738.

3 year guarantee.

Made in Moldova.

*ATENȚIE! *WARNING! Please advise your consultant of product availability while stocks last.

Name of key

Description

ON/OFF

ON/off controller output at any status

Brightness +

1.     Short pressing adjust 5 grade brightness.3%10%30%70%100%

2.     Long-pressing brightness will brighten up gradually and steplessly.

Brightness -

1.         Short pressing adjust 5 grade brightness.3%10%30%70%100%

2.         Long-pressing brightness will dim down gradually and steplessly.

Scene 1-4

Short-pressing in single zone state to show the set state of corresponding zone;

Short-pressing in overall-control state to show the set state of all zones.

Scene setting operation:

1.     Selecting the right zone.

2.     Pressing Scene key 5 times in 5 seconds, will enter scene setting state for corresponding zone, zone indicator light will flash.

3.     Setting the right light state with “ON/OFF”, “Brightness+/-“ in 30 seconds (will exit scene setting state automatically without saving when the time over 30 seconds OR pressing other keys like “A/B/C/D”).

4.     Pressing Scene key 1 time to save and finish the scene setting operation.

Tips:

1)    Scene setting operation for each zone is separately. “Scene control” will work for the corresponding zone only in single-zone control state; will work for the all 4 zones in overall-control state; so, it is flexible to setting up different scenes with zones.

2)    The factory default state of Scene 1/2/3/4 is: 10%/30%/70%/100% brightness for all zones.

Zone 1-4

1.Short press the zone selection key is for switch between the single zonesthe corresponding zone indicator will light up when selected;

2.Long press any one of the zone selection key for 2 seconds is for all zones selection, 4 indicator lights will light up at the same time, and overall control for lamps from all zones.

The biggest advantage of this system is that it can not only solve the cabling problem in engineering wirelessly, but also realize a wired-like operation experience. In order to facilitate the early testing and debugging of the project, the factory status of the receiver is normally unpaired and each remote control has a unique code value. The user should perform the matching work of the remote control and the receiver during the installation of the project to avoid the mutual influence of the radio frequency remote control technology during the later use.

Please pay attention to the following 3 points before operation:

1) All equipment in the complete system after installation should have a unified and unique code value, so as to achieve the security and stability of the system.

2) The receiver can only store one code value and cannot be overwritten. Before learning the new code value, it is necessary to clear the original code of the receiver; the remote control can only save one code value but can be overwritten and can also restore the factory settings. In order to facilitate the later maintenance, the three components that may be involved in the system (including receivers, handheld remote controls, and panel remote controls) can realize mutual learning of code values.

3) Since the receiver performs code value learning in the power-on state, in order to avoid confusion in the area, it is recommended that each area has an independent power switch so that the power of other areas can be easily cut off when the code is being operated.

1Code pairing operation: means that the receiver will only be controlled by the value code remote control.

Step

Operation

Instructions

1

Connecting the load to the receiver and power on it.

1.It is necessary to clear the code first, if the receiver was coded before.

2.Batch operation can be performed within the remote control range.

2

Select area.

Select the area with the "Zone" key and the corresponding indicator lights up.

3

Press and hold “S4” on the remote control for 5 seconds, the indicator of the remote control will flash quickly, means it enters the pairing code transmission status.

Will automatically exit code transmission status after 60 seconds, or pressing any key to exit.

4

See the load light flashes 3 times and return to the initial state

Pairing coding is finished successfully.

2Code clearing operation: means that the original code value of the receiver will be cleared and returned to the factory state. Then it can be controlled by any compatible remote control, and can learn to a new code.

Step

Operation

Instructions

1

Connecting the load to the receiver and power on it.

1. The clearing operation should be finished within 1 minutes after the receiver is powered on. If exceeds the time, can be powered on again.

2. Batch operation can be performed within the remote control range.

2

Press and hold the remote control “S1” for 5 seconds. The indicator of the remote control flashes quickly, means it enters the clearing code transmission status. There is no need to select the corresponding area when clearing code.

1. Will automatically exit code transmission status after 60 seconds, or pressing any key to exit.

2. If the original remote control is lost, the new remote control can be used for clearing operations.

3

See the load light flashes 3 times and return to the initial state.

Clearing coding is finished successfully.

3Code learning operation between remote controls: Used to unify system code values or copy a new remote controls.

Since each remote control has its own unique code at the time of delivery, when there are multiple remote controls in one system, one of them (for example, remote control A) must be selected as the system code value, and the code value of the rest remote controls (for example, remote control B) should be copied to the same one.

Step

Operation

Instructions

1

A remote controlPress and hold “S4” on the remote control for 5 seconds, the indicator of the remote control will flash quickly, means it enters the pairing code transmission status.

Will automatically exit code transmission status after 60 seconds, or pressing any key to exit.

2

B remote control: long press "ON/OFF" for 5 seconds, the remote indicator light changes from 100% to off, means entering the code value receiving state.

Will automatically exit the code value receiving state after 30 seconds, or exit after learning the code value successfully.

3

See the B remote control indicator light flash 3 times.

Code copying is finished and exit code value receiving status.

(4) Copying code from receiver to remote control.

    There is also available to copy the code from original receivers to new remote.

Step

Operation

Instructions

1

Cut off the power of receiver

Which one will be controlled by remote

2

Long-press "ON/OFF" for 5 seconds, the remote indicator light changes from 100% light to off, means entering the code value receiving state

Will automatically exit the code value receiving state after 30 seconds, or exit after learning the code value successfully.

3

Power on the receiver, will see remote control indicator light flash 3 times.

Code copying is finished and exit code value receiving status.

       *The distance from remote to receiver should be less than 2 meters.

       *One time operation will copy all zones code, no need operating different times for different zones.

(5) The remote control restores the factory setting: it means that the remote control will be restored to the factory's unique code value.

Step

Operation

Instructions

1

Long press "ON/OFF " for 20 seconds.

The remote indicator light down to off and then back to 100% light. Means this step is finished

2

Press the "S1" to confirm, the remote indicator light flashes 3 times.

Restore factory settings successfully.

 

Specific References

No customer reviews for the moment.

Write your review

Remote control HX-HWP86-RGB-2.4G

LED lighting fixtures, priced directly from the manufacturer.

Call now 060886600 / 078893738.

3 year guarantee.

Made in Moldova.

*ATENȚIE! *WARNING! Please advise your consultant of product availability while stocks last.

Search

You can try some popular tags here:

Account

No account?
Create one here
4