-
MenuНазад
- Home
-
Categories
-
-
Fashion
-
-
-
Fashion
-
-
- О нас New
- Наши проекты
- Contact Us
Remote control HX-HWP86-CCT-2.4G
Светодиодные осветительные приборы, цена от производителя.
Позвони сейчас 060886600 / 078893738.
Гарантия на все товары от 3-х лет.
Сделано в Молдове.
Specifications:
Working temperature: -20-60 ℃
Working voltage: AC90-265V(50/60Hz)
Dimension: L86*W86*H34 mm
RF frequency: 2.4GHz
Net weight: 130g
RF distance: 20m
The function of each button as below:
Name of key | Instruction | Remarks |
OFF | OFF in any time | |
ON | ON in any time | |
Mode | The mode will go to next, when you touch the key each time | 4 modes in total. |
Speed/Brightness + | The Speed/Brightness will +1, when touch the key each time | Speed for dynamic modes, Brightness for static modes . |
Speed/Brightness - | The Speed/Brightness will -1, when touch the key each time | |
CT Ring | For CCT selection |
4 modes in total as below:
No | Patterns | Remarks |
1 | All colors flash | Speed is adjustable, brightness is unadjustable |
2 | Two colors flash | |
3 | All colors fade | |
4 | Two colors fade |
III.RF CODE
(1)Code pairing operation: means that the receiver will only be controlled by the value code remote control.
Step | Operation | Instructions |
1 | Connecting the load to the receiver and power on it. | 1.It is necessary to clear the code first, if the receiver was coded before. 2.Batch operation can be performed within the remote control range. |
2 | Press and hold “ON” on the remote control for 5 seconds, the indicator of the remote control will flash quickly, means it enters the pairing code transmission status. | Will automatically exit code transmission status after 60 seconds, or pressing any key to exit. |
3 | See the load light flashes 3 times and return to the initial state. | Pairing coding is finished successfully. |
(2)Code clearing operation: means that the original code value of the receiver will be cleared and returned to the factory state. Then it can be controlled by any compatible remote control, and can learn to a new code.
Step | Operation | Instructions |
1 | Connecting the load to the receiver and power on it. | 1. The clearing operation should be finished within 1 minute after the receiver is powered on. If exceeds the time, can be powered on again. 2. Batch operation can be performed within the remote control range. |
2 | Press and hold the remote control “Off” for 5 seconds. The indicator of the remote control flashes quickly, means it enters the clearing code transmission status. | 1. Will automatically exit code transmission status after 60 seconds, or pressing any key to exit. 2. If the original remote control is lost, the new remote control can be used for clearing operations. |
3 | See the load light flashes 3 times and return to the initial state. | Clearing coding is finished successfully. |
(3)Code learning operation between remote controls: Used to unify system code values or copy a new remote control.
Since each remote control has its own unique code at the time of delivery, when there are multiple remote controls in one system, one of them (for example, remote control A) must be selected as the system code value, and the code value of the rest remote controls (for example, remote control B) should be copied to the same one.
Step | Operation | Instructions |
1 | A remote control:Press and hold “ON” on the remote control for 5 seconds, the indicator of the remote control will flash quickly, means it enters the pairing code transmission status. | Will automatically exit code transmission status after 60 seconds, or pressing any key to exit. |
2 | B remote control: long press "mode key" for 5 seconds, the remote indicator light changes from 100% light to off light, means entering the code value receiving state | Will automatically exit the code value receiving state after 30 seconds, or exit after learning the code value successfully. |
3 | See the B remote control indicator light flash 3 times | Code copying is finished and exit code value receiving status. |
(4) The remote control restores the factory setting: it means that the remote control will be restored to the factory's unique code value.
Step | Operation | Instructions |
1 | Long press "mode " for 20 seconds. | The remote indicator light down to off and then back to 100% light. Means this step is finished |
2 | Press the "OFF" to confirm, the remote indicator light flashes 3 times. | Restore factory settings successfully. |
Ⅳ.Wall-panel Installation instruction
Особые артикулы
No customer reviews for the moment.