-
MenuНазад
- Home
-
Categories
-
-
Fashion
-
-
-
Fashion
-
-
- О нас New
- Наши проекты
- Contact Us
Telecomanda DIM/CCT HX-RFBT02B 2.4G
Светодиодные осветительные приборы, цена от производителя.
Позвони сейчас 060886600 / 078893738.
Гарантия на все товары от 3-х лет.
Сделано в Молдове.
Features:
1) Working voltage: 3V (AAA*2);
2) Adopts RF 2.4GHz wireless control, remote control distance up to 30m and no directional;
3) Unique interface, and easy to operate;
4) RFBT02A for RGB/RGBW/RGBCW, RFBT02B for DIM/CCT.
5) Come with holder, easier access and keeping;
6) Two way for accessories installation, flexible choice;
7) Compatible with MINI001, D002, DLV003,DLV004,DLV005, D015, D016 controllers;
8) 3 years warranty.
Working temperature | 0-40℃ | Working voltage | 3V (AAA*2PCS) |
Sleep current | <20uA | Emission current | <20mA |
Sleep power consumption | <60uW | Emission power consumption | <60mW |
Net weight | 30g | Dimension | L108*W36*H22 (mm) |
RF distance | ≤30m | RF frequency | 2.4GHz |
Accessories | bracket 1pc, 3M foam sponge glue 1pc, screw 2pcs, expansion tube 2pcs. |
Direction for use
The remote control function keys are composed of 1 color ring and 8 buttons. It is a 5-in-1 type remote control, which can be used to control DIM/CCT/RGB/RGBW/RGBCW LEDs. The functions are as follows:
No | Patterns | Remarks | No | Patterns | Remarks |
1 | White breathe | Speed is adjustable, brightness is unadjustable | 5 | 7 color fade | Speed is adjustable, brightness is unadjustable |
2 | 3 color jumpy | 6 | R/G cross fade | ||
3 | 7 color jumpy | 7 | R/B cross fade | ||
4 | 3 color fade | 8 | G/B cross fade |
Type 2: RGBW/RGB+W
No | Patterns | Remarks | No | Patterns | Remarks |
1 | White breathe | Speed is adjustable, brightness is unadjustable | 5 | 7 color fade | Speed is adjustable, brightness is unadjustable |
2 | 3 color jumpy | 6 | R/G cross fade | ||
3 | 7 color jumpy | 7 | R/B cross fade | ||
4 | 3 color fade | 8 | G/B cross fade |
Type 3: RGBCW/RGB+CCT
No | Patterns | Remarks | No | Patterns | Remarks |
1 | White breathe | Speed is adjustable, brightness is unadjustable | 5 | 7 color fade | Speed is adjustable, brightness is unadjustable |
2 | 3 color jumpy | 6 | R/G cross fade | ||
3 | 7 color jumpy | 7 | R/B cross fade | ||
4 | 3 color fade | 8 | G/B cross fade |
Type 4: CCT(CW+WW)
Type 5: DIM(Single color)
. Wireless remote control code value setting method
The number of controllers and remote controls in one system is unlimited. 2.4G Smart system has one unique RF code for communication. Each controller and each remote control can remember only one RF code, recorded in the first programing. New RF code can be recorded after delete the old one.
Tips: matching code and clearing code operations both use the same button , the 2 operations is performed alternately, which can be distinguished by the color of the color ring light:
Matching code operation- Red;
Clearing code operation- Green.
Code matching operation: the receiver will only be controlled by the value code remote control.
Step | Operation | Instructions |
1 | Connecting the load to the receiver and power on it. | 1.It is necessary to clear the code first, if the receiver was coded before. 2.Batch operation can be performed within the remote control range. 3. Please remember to cut off other un-code zones power, or will be paired together. |
2 | Press and hold (RGB ON/OFF key) on the remote control for 5 seconds | 1. The color ring light on the remote control should be Red (if green color light up, please press any key to exit and re-operate this step after then). 2. The RF indicator on the remote control will flash quickly, see the load light flashes 3 times and return to the initial state, means matching coding is finished successfully |
3 | Press any key to exit and end the operation | Also will automatically exit code transmission status after 60 seconds |
Code clearing operation: that the original code value of the receiver will be cleared and returned to the factory state. Then it can be controlled by any compatible remote control, also can be paired to a new code.
Step | Operation | Instructions |
1 | Connecting the load to the receiver and power on it. | 1. The clearing operation should be finished within 1 minute after the receiver is powered on. 2. Batch operation can be performed within the remote control range. |
2 | Press and hold (RGB ON/OFF key) on the remote control for 5 seconds | 1. The color ring light on the remote control should be Green (if red color light up, please press any key to exit and re-operate this step after then). 2. The indicator of the remote control will flash quickly, see the load light flashes 3 times and return to the initial state, means pairing coding is finished successfully. 3. If the original remote control is lost, the new remote control can be used for clearing operations. |
3 | Press any key to exit and end the operation | Also will automatically exit code transmission status after 60 seconds. |
Code learning operation between remote controls: Used to unify system code values or copy a new remote control.
Since each remote control has its own unique RF code at the time of delivery, when there are multiple remote controls in one system, one of them must be selected as a main, and other remote controls should copy its RF code.
1) Main remote control: Press and hold (RGB ON/OFF key) for 5 seconds ( the color of color ring light on the remote control can be red or green). The RF indicator of the remote control will flash quickly, means it enters the sending code transmission status.
2) New remote control: Press and hold (RGB Mode key) for 5 seconds, indicator will turn from 100% to off and the color of color ring light on the remote control will be blue, means it enters learning code status.
3) The RF Indicator of the new remote control flash 3 times after successful code learning.
Remote control RF code learning from controllers
1) Turn off the power supply of the controllers.
2) Press and hold (RGB Mode key) for 5 seconds until indicator of remote control turns off.
3) Turn on the power supply of the controllers. The RF indicator of the remote control flashes 3 times after successful code learning.
Note: The distance from controllers to remote controls should be less than 2 meters.
Restoring factory settings of remote control
1) Press and hold (RGB Mode key) for 20 seconds until the RF indicator of remote control process the state as 100% -off-100%( the color ring light state as off-blue-off at the meanwhile).
2) Press (RGB ON/OFF key) to submit and finish the operation. Indicator of the remote control will flash three times after successful operation.
About installation of remote control’s bracket:
1.Accessories include: bracket 1pc, 3M foam sponge glue 1pc, screw 2pcs, expansion tube 2pc.
2. There are 2 options for bracket installation:
1) Using screw and expansion tube make drilling installation (suitable for uneven and ash surface);
2) Using 3M foam sponge glue make free drilling installation (suitable for flat no ash surface).
6. Compatible family
Remote control | Receiver | Other compatible remote control | Compatible repeater |
HX-RFBT02A (RGB/RGBW/RGBCW 3 in 1) | MINI001-RGB, MINI001-RGBW D002(4 in 1), DLV003(4 in 1),DLV004 D015(RGB), D016(RGBW), DLV005(5 in 1) DLC006(4 in 1) | HX-RFBK-RGB-2.4G(5 in 1) HX-SWC-2.4G (DIM/CCT/RGB/RGBW) HX-HWP86-2.4G(DIM/CCT/RGB/RGBW/RGBCW) | WP86-AP (RF signal repeater) |
HX-RFBT02B (DIM/CCT 2 in 1) | MINI001-DIM, MINI001-CCT, D002(4 in 1), DLV003(4 in 1) DLV005(5 in 1) DLC006(4 in 1) | HX-RFBK-RGB-2.4G(5 in 1) HX-SWC-2.4G (DIM/CCT/RGB/RGBW) HX-HWP86-2.4G(DIM/CCT/RGB/RGBW/RGBCW) | WP86-AP (RF signal repeater) |
Product information for placing order
Product name | Item number |
RF 2.4G Remote Control | HX-RFBT02A, for RGB/RGBW/RGBCW(3 in 1) HX-RFBT02B, for DIM/CCT(2 in 1) |
Особые артикулы
No customer reviews for the moment.